Advantest R3767CG/R3765CG Network Analyzer
The R3765CG/R3767CG network analyzers are vector network analyzers that incorporate a new RF circuit analysis technique. The measuring frequency range is from 300 kHz to 3.8 GHz (R3765CG)/300 kHz to 8 GHz (R3767CG). ADVANTEST's unique high-speed signal processing technology enables a faster measurement speed. In addition to the basic model, a model with built-in bridge transmission/reflection characteristic measurement and a model with a built-in S-parameter test set for forward and reverse measurement are also available. An optional 3-port test set or 4-port test set can be added to these models. By installing additional input channels in the receive section, the multi-port models allow perfectly simultaneous measurement of two different measurement paths, revolutionizing the measurement efficiency of multi-port devices.
The 8.4-inch color TFT liquid crystal display allows the waveform display to be split into four windows.
An independent measurement path can be selected for each window, thus allowing the simultaneous display of up to eight parameters in four paths. Analysis of measurement items in a wide range can be completed instantaneously. By executing 2-port full calibration, measurement speed can be increased to 0.15 ms per point.
The optional software fixture function makes measurement of normalized impedances other than 50 O easy. This function converts the impedance in software, eliminating the need to provide hardware such as an impedance converter. Furthermore, balanced circuits can be measured and matching networks such as filters and amplifiers can be simulated using the network analyzer, making it suitable for wide range of applications.
ADVANTEST's popular BASIC controller function is incorporated in the analyzer as standard, expanding the analyzer's applications in automatic measurement.
Features
High throughput
For type C, 4 S-parameters can be displayed simultaneously through 0.15 ms/point high speed frequency sweep and 4 channel/8 trace.
Wide dynamic range : 100dB
Program sweep function
Frequency, output level, RBW, and setting time can be set for each segment.
MS-DOS format disk
Allows programming or data analysis using an MS-DOS PC with an MS-DOS format FD drive.
Three disk density types (DD : 720 KB, HD : 1.2MB, HD : 1.4MB) |
 |
|
您当前位置是：商业机会 >> 电工电气 >> 电工仪器仪表 >> R3765CH现货多台
联系信息